Are you worried about storage? Using wire shelves can be a solution. The wire shelves are ventilated. These products are affordable, versatile, and have plenty of uses. Another feature which makes it popular is its easiness of installation. It can be placed within your closet or in your bathroom. You should be aware of DIY, cut the wire shelves to suit. So here is guide on how to cut wire shelving.
How To Cut Wire Shelving – Step By Step Guideline
Total Time: 1 Hour
At the very beginning, measure the length of the wire you need to cut to make your wire self. If it is the closet, measure inside. The wires for wire shelves come in different sizes. So, it is must you know the exact measurements to fit your desired space.
Next, proceed for cutting. Use your legs to hold the wire firmly. Restrict it to move. You can use a pair of cutters for the purpose. Cut slowly as per the cut line produced after measuring.
Smooth the edges of the wire. A bolt cutter can produce sharp edges. These sharp edges might be dangerous. Using a drum sander or a simple piece of sandpaper can help you.
After the wires are cut as measured and treated for sharp edges, proceed for installation. For making the perfect fit cutting small pieces may be required. To make installation easier short wall clips are available. So, to install, you use the wall clips to support the wires.
Steps For Installing Wall Mounted Shelves
On your wall mark location for studs
To find the exact location for hanging shelves, better to use a stud finder. In course, you can attain the utmost precision. Once the first stud is located, find the next. The consecutive stud should be at a gap of 16 to 24 inches.
If you are using a hang track, install the same—drill screws along the length. The hang track needs to be placed parallel to the ceiling. The ideal position would be 1 ½ “below the ceiling. It would be advisable to use a 12 pan head screw.
Maintain a correct leveling of the hang track before screwing the others. If found uneven, the hang track needs relocating by ½.”
Once the hang track has been set in position, hang the standards from it. These standards must be as per the manufacturer’s recommendations. But usually not less than 24 inches. Proceed with drawing a straight line that you follow to place the standard and put the screws.
Insert small brackets into slots of standards to fix them in place. Remember to maintain a proper gap between the shelves if you plan for baskets or other hanging elements.
Once the brackets, called hanger bars, are installed, you put the wire shelves on it. If you are sure the shelves are rightly installed, put caps on the projected wire end.
If you want to hang clothes, the shelf can be provided with bar support that would enable you to provide a hanging.
Pantry Wire Shelves
Measure the space behind the pantry door
You need to purchase those materials you want to build the wire shelf—for example, the white color wires shelves, wire clasps, and shelf mounting screws. You may also get wire cables and wire crimps to hold the cables together. For touch-up, you can buy plastic materials easily available at hardware stores.
You need to measure how many wire shelves are going to fit your door. You should take into consideration for the door lock. Better avoid troubles in opening and closing the door. The shelves at the bottom must be built smaller than the top ones to avoid framing trouble. Try to maintain a gap between the wire shelves to make your bottles/containers fit.
Next, you cut wires to make the shelves. The shelves must be cut for wires that match the door panel. Lengthier on the top and shorter for bottom
Then it would help if you bent the wires probably through a 4-inch mark to create a 12inch depth of the shelf. It would help if you clamped the wires firmly. The use of bricks may solve the purpose.
Before the holes are drilled on the door panel, the setting of the cable will be needed. The cables are fitted to each corner of the shelf. The cords act as a shock absorber. Better us a reasonable height for cable. You should consider two number connection of cable between each shelf. Use a crimp, also known as a ferrule, to connect the cables before hanging. Better to use a level for screwing in place. Utmost care should be taken to keep the doors moving. In the case of obstruction, you may have to reduce the length of wires.
In the next step, use the plastic paint and brush to hide all the exposed portions. You may need to cover up those pointed portions that get produced after using your Dremel tool. After the paint dries, put rubber coating on exposed metal to cover-up sharp edges.
Once the pantry wire shelves are hanged, put your containers to check whether they fit. The shelves must be capable of withstanding the weight.
What Do You Need To Cut Wire Shelving
1. A Bolt Cutter
Sometimes also named as bolt cropper, gets used for cutting padlocks, chain, or wire mesh. A maximum cutting force or leverage can be achieved. That is because of their long handle, compound hinge, and short blades.
2. The Measuring tape
The measuring tape is a necessary commodity you will need. To take the exact dimension within the closet or space, you choose to be measured to achieve precise cuts. So, measuring tapes are vital to take measurements before cutting.
3. Permanent marker
You are supposed to cut along mark-up lines. Marker pens produce the mark after taking dimension. So, it would be best if you had the marker pen
4. Sandpaper Or Drum Sander
When you cut the wire with a bolt cutter, the produced wires get sharp edges that are dangerous to handle. So, it would be advisable to get rid of the consequences. Use a drum sander or merely a piece of sandpaper to remove the sharpness, prepare clean edges.
5. Plastic Paint And brush
The plastic paint and brush are required to cover-up the exposed metals. Generally, white plastic paint is used. For staying longer better, two coats of paint are applied.
6. The Dremel Tool
We find these Dremel tools mostly during installing pantry shelves. These are small rotary tools that bear a lot of accessories and attachments. These tools are most popular in woodworking or metal shops. The tool is capable of handling wood, plastic, metals, glass, etc.
1. How to cut wires without a bolt cutter?
Use a hacksaw, a circular saw, or a reciprocating saw if you want to cut wires for shelving. Any among the stated can be used as an alternate to a bolt cutter.
2. Is it possible to paint wire shelves?
Due to prolonged use, the wire shelves may lose their paint. As a result, exposing their metal interiors. They look nasty. To cover-up, you can apply spray paint. You are suggested to use a few coats of spray paints. So to get rid of a lousy looking closet, maintain the colors properly.
3. Is it possible to cut wires without wire cutters?
You can use household items like scissors, knife, or saw. You can also use an ax. Further, a screwdriver and hammer can serve the purpose.
4. Up to what weight the wiring closet set hold?
Closet wire shelves can sustain around 80 pounds of weight. If it is made of steel, toughness is better. The EZ shelf holds up to 200lbs. The EZ heavy-duty garage shelves can withstand around 250lbs.
5. What are the recommended means to store clothes on a wire shelf?
Usages of plastic bins are the most suggested way to store clothes. Using fabric bins, plastic beans, or baskets are sturdier methods of storing clothes
The wire shelves are a unique system for storing things. For safety, NSF has limited usage up to 800lbs. The versatility of the wire shelves makes them be used commercially. Also, industrially and home. You can avoid floor space occupation; wire shelves can be made wall mounted on the wall. The standard readymade wire shelves may not fulfill the user’s need in such case DIY. The methods for cutting and making wire shelves are quite easy; you need proper tools.