A chainsaw is used for cutting purposes. It is a portable mechanical saw. It uses its teeth like structure to cut the things. The teeth set is attached to a rotating circular chain. This chain runs along the guide bar. There are many applications of the chainsaw. They are used in tree felling, firebreaks cutting, limbing, bucking, and many other things. Sometimes, you may need to use it in your project. Here, we have compiles some chainsaw tips for beginners so you as beginner have a clear idea about a chainsaw before proceeding.
Our Recommended Chainsaws
Chainsaw Tips To Remember While Using It
If you are working with a chainsaw, then you all know the process of using it. There is no difficulty in using this tool if you are familiar with it. But we think that you struggle with it while working sometimes. This is because many of us don’t know the good trick to use it. Knowing the procedure will be enough to complete any work. But if we want to complete our work with ease, we should be aware of specific chainsaw tips and tricks. It will prevent you from wasting your time and struggling with the device.
So, we assume that you all are aware of the using procedure of a chainsaw. That’s why here, we will provide some essential techniques that you can apply when using it. These chainsaw tips help work with a chainsaw. If you want to skip any of the tips, then you can do that. But we are sure that once you read them, you will try to use them. These will work as your life savior tips. If you want to be safe after working, then also you should go through this section in-depth. Let’s have a look at all the chainsaw tips and tricks that have been mentioned here.
Tip 1: Oil Reservoir Cap
It is an important part of any chainsaw. You have to take the utmost care while pouring the oil into it. If there is no oil in the required quantity, then the chainsaw will not work. It should be filled with proper oil. There are many varieties of chainsaw oil. It depends on your chainsaw material and feature. Choose the appropriate type of your chainsaw oil. Suitable oil will only work with the machine.
It keeps the machine healthy. You will find a reservoir cap in your chainsaw for pouring the oil. The oil reservoir is located along with the fuel cap. It helps to notify you about the oil level in chainsaw. If it is green, then the oil level is less. In some chainsaws, it turns on automatically if the oil level is running out. Then, you cannot turn on your chainsaw device. So, make sure that you remember this chainsaw tip and identify the status of the oil reservoir before using your chainsaw.
Tip 2: How To Avoid The Kickback Condition
This one of the most important chainsaw tip for beginner. Kickback is a prevalent condition during the use of a chainsaw. Cutting with the saw on the bottom part of the bar is very usual work. We generally go for this type of cut because it is very comfortable for cutting. But it is very risky. This way of cutting pulls the device away. It is easy to control if we hold the device with a proper grip.
If you feel any difficulty in making an adequate grip because of gloves, then you can remove them in this case. You should avoid the kickback zone of any workpiece. If you go in that zone, then the saw will come back towards you. To prevent this, many modern chainsaws come with a safety brake. This chain brake is attached to stop the chainsaw if kickback occurs. But for more safety, you should maintain an encircling grip around the chainsaw. Don’t leave the device with any assumptions.
It will create trouble if it goes out of control. Try to use your thumb around the front handle to have a better grip. This is the best way to ensure your safety. Especially if you have an older version of the chainsaw, then try to make the grip using your thumb and hand. You need not take any tension if you have a modern chainsaw.
Tip 3: Sharpening Of Chainsaw At Right Time
You are working with a cutting chainsaw. For better cutting, we should always a proper cutting tool. The cutting part should be well sharped (you can get the best sharpners). If you have a blunt blade, then you won’t be able to cut any workpiece nicely. A sharp chain cuts easily with less effort on the workpiece. Any dull or blunt chain tries to ride away from the bar.
It doesn’t hit the workpiece properly. If we apply more force also on that chain, then also pressure resulted is less. Blunt edge has more area. So, the force gets distributed. If you force the chain to cut the bar, then you will be discouraged by the work. If you want to get peak performance, you have to sharpen your chainsaw from time to time. If the chain is not correctly sharped, then it will spit out the dust.
It can also cause unwanted chipping of the workpiece. If you are not able to sharpen your chainsaw, then you can ask a new chain for your saw from some nearby tool shop. But do not continue your work with any unsharpened tool. You will end up getting no benefits from that. If you want to get perfection, then make a regular habit of sharpening your chainsaw.
Tip 4: Prevention Of Any Hazards
While working with the chainsaw, you may get injuries if you do not follow proper procedures. For this, you should also know the appropriate holding of the chainsaw. Your half work will be done if you hold the device firmly and correctly. You can use your hand thumb for this. The most common injuries occur at your thighs and left arm.
But you can avoid this by taking two crucial precautions. This is the first precaution. Always try to wrap up your thumb of the left hand around the handle. You should consider the front handle in this case. When you start the cutting, then place your thumb on the front handle of the chainsaw. This will form an encircling grip. It will prevent the movement of a saw in any unwanted direction.
You can have better control over it by this method. The second precaution is your moving out. Move along with the saw movement. Whenever it tries to move in some other way, then move with it in that way. Try to be flexible while working. It will prevent any mismatch of your thinking and chainsaw movement.
Tip 5: Treating The Gasoline After Buying It
This precaution will prevent you from unwanted expenditure. An average repair for a small engine is also costly. It’s not worth according to its utility. A high amount of revenue for tool shops comes from this repair. Because if we do not treat our device with care, then the engine needs repairing after a short period only.
But we can prevent this if we treat the gasoline of the chainsaw. You can get the best gas chainsaws. Modern gas formulations do not last for an extended period. When these gases break down, then the engine feels hard to work. It stops the whole mechanism of cutting device. To prevent your device from such a condition, treat the gas by any stabilizer. You should do this just after its purchase. It will save your money to a great extent.
Tip 6: Using The Chain Brake
Now we are working with the most critical device. If you need to understand the usage of the chainsaw, then try to know more about chain break. This will help you when something unexpected thing happens. It is just like a regular bicycle.
When you learn to ride the bicycle, then it is always told you that you should keep your hand on the break. It will prevent you from falling. So, the same case is with the chainsaw. If you want to work with safety, then you need to know the control measures that provide you along with your chainsaw. You can always stop your chain break when needed. It is the most critical tip among these chainsaw tips.
Things You Would Need
- A hard hat for your protection
- Ear protective tools
- Safety goggles
- Long pants and full-body covering clothes
- Steel-toed boots
- A flat filer
- File Gauge
- Cleaning clothes
- Wrenches and Screw Drivers
- Socket wrenches and sockets
- Chainsaw sharpening cut
Warning And Safety
- Do not use the chainsaw above your shoulder height or ground level. This needs a high amount of experience.
- Always have another person along with you while working.
- Never have any drugs or alcohol while using the chainsaw.
- Don’t use your chainsaw when you feel to be fatigue.
- When you are tired of using the chainsaw, then have a short break and start.
- The chainsaw is mainly designed for the wood workpiece.
- Don’t use the chainsaw for digging or levering work.
- Always measure the chainsaw and bar size with the workpiece.
- Wear safety goggles while working.
- Work in a ventilated place.
- Do the cutting process outside, if possible.
1. Which type of chainsaw is more affordable?
You can get an electric chainsaw with less cost. These are less expensive because of less power. If you want to work with less workpiece, then go for this chainsaw.
2. What is the use of leather safety mitt in a chainsaw?
A leather safety mitt is attached to your chainsaw securely. It is free to rotate from the front handle of the chainsaw. It helps you to keep your left hand on the handle. It prevents you from any kickback. Your hands will be safer because of this feature.
3. What precaution should I do during chainsaw fueling?
You should follow the manufacture’s instructions. It will tell you the type of fuel to be used in your chainsaw. During the poring of fuel, use a funnel of proper size. See that there is no unwanted ignition while fueling the chainsaw.
4. Should we wear safety gloves while using the chainsaw?
Yes, you should always wear hand safety gloves while using the chainsaw. Also, use gloves when you sharpen your chainsaw. It will protect your hands from any cuts while working.
5. Which handle should we use to hold the chainsaw?
You should use the chainsaw by holding its front handle. Keep your muffler away from the chainsaw blade. Otherwise, it will result in some severe ignition.
We have adequate safety measures along with chainsaws. But still, there is some possibility of injuries. It involves a large amount of force and pressure. If you do not take proper care, then a common incident can happen through kickback. It is the case when the chainsaw catches fire instead of cutting the workpiece. Another major problem if of timber falling. It displaces from its desired position. These things may occur when you work with any of the chainsaws.
You have to be attentive while working. Otherwise, it can be fatal for your life. Never try to neglect any happenings. If you do not feel comfortable, then stop the process then and there. Make sure that everything is proper. When you continue your work with proper attention, then it is not difficult to use a chainsaw. If you know the proper chainsaw cutting technique then you don’t need to worry. Always try the use of a chainsaw on some dummy workpiece first. Then you can go for a real workpiece. We hope that you have found this article useful.