Wen 6550 Vs 6552: Which Is Better?

There are many thickness planers present in the market, but recently the market has taken over by storm of Wen 6550 and Wen 6552. People are finding it hard-to-pick between the two. So, we have brought you the product comparison between Wen 6550 vs. 6552. We have carried out several tests based on which we have compared the functions, features, efficiency, etc. of the two. After reading this article, you will be able to choose the best suitable product for you.

Our Verdict

No one can replace the hand planers, but we have tried our best to find out which stand out between the two, and for us, the clear winner is Wen 6552. Wen 6550 provides you the optimum stability while Wen 6552 comes with a powerful motor and three-blade feature. Now let’s jump on to the features and functionality of both to understand the pros and cons.

Wen 6550 Vs 6552: Comparison Chart

Wen 6550 Vs 6552: Differences

1. Number Of Blades

Wen 6550 comes with a 2-blade system for smoothening and leveling of wooden logs. This model has fewer blades when compared to model Wen 6552, but it still relatively does an excellent job at smoothing.

Wen 6552 comes with a 3-blade system, which cuts more effectively and efficiently than the previous model. However, the number of blades doesn’t determine the cutting quality of the machine. Machine with 1-blade can give excellent cutting quality. The company is still working on the cutting quality of 6552; it is not that good for now.

2. Table Material

The base material for Wen 6550 used for passing wooden logs is granite. The heavy-duty granite is given a smooth finish for easy passage of a wooden log. Granite tables may have more shelf life than the machine itself. The table only allows us to pass a wooden block of 12.5 inches.

Wen 6552 uses metallic table material with a slick coating for wooden logs to glide over them easily. The machine is 5 inches wider than 6550 i.e., 13 inches. The disadvantage of the metallic table base is it gets damaged faster and has less period.

3. Cutting Qualities

As indicated by the maker, the Wen 6550 backings block statures of up to 6 inches. Administrators can modify the sharp edge to bring down by a limit of 3/32-inch stretches, which doesn’t strain the machine, nor does it produce lopsided cuts. Nonetheless, we found that the 6550 leaves undesirable streaks.

Wen 6552 likewise benefits from barricades of to 6 inches in height. Essentially, the movable slicing profundity is also set to stop at a limit of 3/32-inch stretches. In any case, regardless of utilizing the equivalent precise 3-blade framework as the 6550 model, it gives less cutting quality. This is no doubt because of the work of the table. 

Moving on, the Wen 6552 is the more predominant of the two. The movable profundities can be arranged precisely the equivalent. However, 6550 creates observably progressively scalloped edges. Be that as it may, the two machines have snipe issues, so we recommend putting a conciliatory board set in the front and back of the board you’re proposing to deal with.

4. Weight

Proceeding from the last point, the granite table in Wen 6550 includes a lot of weight to the unit. Additional weight is acceptable since it keeps the machine tough, and vibrations will turn out to be more averse to trouble the cutting procedure of the 2-sharp edge framework. This planer tips the scales at 73 pounds, which can be a strain on your back and your truck’s bed on the off chance that you convey it all around.

The metal table in Wen 6552 is significantly lighter in weight than the rock table of 6550. The general load of this model is a lighter 66 pounds, making it increasingly versatile and less challenging to lift and take with you. In any case, at just 66 pounds, you’ll have to ensure the unit is introduced safely by holding it down with the corner mounts found on the base of the unit. On a positive note, notwithstanding being lighter, as long as the unit is mounted made sure about on your workbench, there shouldn’t be any issues of unreasonable vibrations that can demolish bits of fragile wood. 

This is dependent upon the client to choose whether less or more weight is better. For the most part, individuals who work in their woodshop wouldn’t see any problems a heavier planer since they won’t have to accept it to any position locales. Be that as it may, for the wellbeing of safety, even though the 6550 is entirely overwhelming and resolute all alone, you should keep the unit darted down each time you use it.

Wen 6550 Vs 6552: Similarities

1. Motor And Speed 

• Wen 6550

The Wen 6550 highlights a 15.0 amp engine – the norm for home-use planers – which conveys up to 17,000 cuts for each minute. The cutting velocity is quite astonishing, taking into account this is a passage level tabletop planer that helps DIY lovers. The engine works viably to deliver even outcomes while moving the passing block at velocities of to 26 feet for every minute.

• Wen 6552

This model additionally includes a 15.0 amp engine; however, the planer’s blades move considerably speedier (25,500 cuts for each minute). Generally, a speedier cutting edge speed converts into all the more even and smoother wraps up. The fast cutting rate improves it contrasted with the 6550, and after testing the unit, there’s nothing to grumble about. Like the 6550 model, wood can go under the cutting edge at up to 26 feet for each moment while delivering ideal outcomes.

2. Blades

• Wen 6550

The sharp edges utilized in the Wen 6550 and 6552 are comparable in development and structure, yet the length of every edge varies to help the diverse cutting widths. The 6550 uses 12.5-inch sharp edges, and substitutions are sold in sets of two (2-cutting edge framework). Be that as it may, clients gripe about buying substitution sharp edges for their 6550 times and again. This is principal because of the over the top cutting velocity and the weight put on every sharp edge, wearing them dull or, in any event, getting chipped after constrained use.

• Wen 6552

the cutting edges utilized in the Wen 6552 are indistinguishable from the 6550, except the width. Substitutions can be bought in sets of three (3-edge framework). Shockingly, the recurrence of buying new edges for this model isn’t as high contrasted with the younger sibling form since the number of sharp edges and cutting velocity is nearly adjusted, taking into consideration less yet more uniformly circulated pressure per cut for every edge. 

The 3-sharp edge arrangement of the 6552 will set aside you more cash since you won’t have to supplant them as regularly as you would with the 6550 model. That being stated, we find that the general nature of WEN-made sharp edges and bits each force apparatus they produce are of second rate quality. On the off chance that you can buy German-or US-made sharp edges that fit in the 6550 or 6552, we propose utilizing those. You should also check out a detailed review of Wen 6502.

Features And Technical Specifications: Wen 6550 Vs 6552

Wen 6550 Features And Technical Specifications:

• Granite table gives a solid non-damaging surface for wood to go over smoothly.
• Plane barricades to 6 inches thick and   12.5 inches wide 
• 15A engine creates 17,000 cuts for each moment at 26 feet for every moment feed rate 
• Modify profundity to plane off somewhere in the range of 0 to 3/32 of an inch with each pass 
• Fan-helped dust port expels sawdust from the workpiece.
• Brand name: WEN, Inc.
• Model: 6550 Thickness Planer with Granite Table.
• Motor (VAC, A): 120, 15.0.
• No-load RPM: 8500.
• Cuts per minute (CPM): 17,000.
• Maximum stock width: 12.5
• Maximum stock thickness: 6.”
• Feed rate in feet per minute (FPM): 26Weight: 73 pounds

Wen 6552 Features And Technical Specifications:

• On-board material removal gauge informs users about the cutting depth of each pass
• Plane boards up to 6 in. T and 13 in. W
• 15 Amp motor generates 25,500 cuts per minute at a 26 ft. per minute feed rate
• The 3-blade design does easy work out of even the hardest of woods
• Fan-assisted dust port removes sawdust from the workpiece.
• Dimensions of 25.2 x 21.8 x 16 inches
• Weighs 66 pounds
• Three cutting blades
• Powerful 15 amp motor that produces 8500 revolutions per minute
• 25,500 cuts per minute speed
• Accepts boards up to 6 inches thick and 13 Inch wide
• Has a thickness depth adjustment knob to adjust the cutting depth of 0 to 3/32 Inch
• Strong, cast iron and steel build
• Height adjustable infeed and outfeed trays
• Comfortable rubber-grip adjustment crank
• Return rollers at the top of the planer

Wen 6550 Vs 6552: What’s In The Box?

• Tri-Roller Feeding System & Reversible Blades

The WEN Thickness Planer uses a tri-roller feeding system to help minimize snipe. The three dual-edged blades on the middle roller can be reversed to help elongate their life cycle and ensure sharp cuts.

• Fine-Tune Depth Adjustments

Easily adjust the height of your planer with the comfortable rubber-grip adjustment handle. Each quarter rotation adjusts the height of the cutter head 1/64 of an inch for maximum precision during operation.

• Infeed and Outfeed Tables

Foldable infeed and outfeed tables add support to longer workpieces traveling through the planer. Both tables can be adjusted to get the perfect angle for smoothly feeding boards and fighting snipe.

• Dust Hose Connection Port

Attach a dust extraction device or a wet/dry vac to the handy 2 inches, 2-1/2 inch, or 4-inch fan-assisted dust port adapter to minimize cleanup. Keep all of the sawdust and shavings in one place instead of all over the workshop floor.

Wen 6550 Vs 6552: Overview

Overview Of Wen 6550

Overview Of Wen 6552

FAQs

Conclusion

These tools receive more compliments than critique comments, that’s a good thing about this. You should choose Wen 6552 if you are willing to pay more price or comfortable in pushing your financial limits. The better finish product at the same cost makes it no contest. These are both well-equipped tools and will produce a high level of surface finish, even when compared to brands costing a lot more for the same work. The 6552 is not an industrial or commercial grade tool, but for the rest of the woodworking complex, it is hard to find a better at the same price tag.