Technology has changed everything around us. A 6-inch mobile now does all the work done by large machines in the past. Imagine having devices that can see through walls. They aren’t huge and can work with your phones. It sounds fantastic, right. Two brands which are very famous for this are the Walabot and Flir one. Let’s find out how they work and what they do best.
Both of these devices are quite different. They follow other mechanisms and are better for different jobs. Walabot uses radar to do the job. They help in detecting pipes and wires in a wall.They are even very good for insect detection. Flir One uses an infrared camera for detection. They are good for finding the cold and hot spots. They can even check pipe leaks and broken pipes.
Walabot Vs Flir One: Comparison Chart
|Usability||It should be held against the wall.||It can be used away from the wall.|
|Price||Cheaper||A bit expensive|
|How they work||Radio waves||Infrared signals|
|Best for||Pipes, wires, and studs||Hot and cold spots|
|Compatible with||Android devices only||Both Android and iOS|
|Weight||Around 7 ounces||Around 3 ounces|
|Price||Check Price||Check Price|
Walabot Vs Flir One: Differences
1. PriceWalabot has a reasonable price for the features provided. It is neither too cheap nor too costly. This is not the case in Flir one. They are a bit expensive. The price is for the infrared feature, which may cost more. They also give the output with high clarity, which may increase the price. They even add thermal imaging to the phone. All these features are the reason for the high cost. Flir One is a bit expensive due to the high features it provides. Walabot is much cheaper.
Walabot and Flir one uses different mechanisms to do the job. Flir one uses an Infrared camera to see through the walls. They help by detecting the infrared energy emitted or reflected. The camera converts the infrared data into an image. This is how the hot and cold spots of walls get detected by Flir one. Walabot uses radar to identify the objects. Radar stands for radio detection and ranging. They use cutting edge radar technology. They use radio waves to detect materials like pipes, studs, etc.
Both products use different methods to do their work. The need for the user may help in deciding which to prefer.
Both Walabot and Flir one are very handy to use. They weigh significantly less and can be portable to different places. The user must fix the Walabot device to the wall to use it. They weigh about 6.4 ounces. Sliding the phone with the device will help to detect the materials behind the wall. Flir One works differently than the latter. Fixing the device in the wall is not needed for Flir one. They can be even used by standing a few feet away from the wall. They weigh around 2 ounces.
If the user doesn’t like fixing the device to the wall, they can prefer Flir one. If that is not an issue, Walabot is the right choice too.
These products need smartphones to work with. They should be able to work with different models of smartphones. Walabot needs a USB on the go cable to get connected to the device. But there is another problem in Walabot. They cannot be compatible with Apple products. They work only with Android products. Flir one is better in this feature. They can work with both Android and Apple products. The user can also choose between micro USB and USB-C for connecting the device with the phone.Flir One is the winner in this category. They are compatible with all types and have better options too.
Both of these products have unique uses. Walabot is a better choice if the user needs to check for objects inside the wall. They work very well with sheetrock walls. The 3-D imaging gives the user a high-quality output. They are perfect for detecting materials like pipes, studs, and wires. They can even detect termites in the walls. Flir one uses the infrared camera. So, it’s better to detect heat signatures. They are perfect for finding pipes in the walls. This may help the user find detects. They are even very good at detecting spots where heat transfer is going on. They are very fast in their job too.
Both the products have different uses according to their designs.
Walabot Vs Flir One: SimilaritiesWalabot and Flir One are the most popular brands with these features. Even though they have a lot of differences, they have some similarities too. They are convenient and give accurate details also. Imagine the work and trouble a false nail in the wall can provide. So these products are such an asset. People who prefer to remodel their houses will find these tools excellent. They can be connected to the user’s smartphones within seconds. They could be portable to different places due to its light-weight. The versatility of these products is the reason for their success in the market. Both the brands are becoming very popular and are getting good profits too.
Walabot Vs Flir One: Overview
- Detects wood & metal studs, PVC & metal pipes, electric cables and wires inside walls
- Uses cutting-edge radar technology to see inside drywall
- Scans up to 4 inches (10 centimeters) deep into your walls
The Walabot comes from an Israel based company, Vayyar imaging. The idea was from revolutionary 3-D imaging technology. The introduction of the Walabot DIY gave them fame among people. Walabot will be an excellent asset for renovations and remodeling projects. The use of radar is an excellent choice as its very safe and fast.
They can see things into walls up to four inches thick. They can even locate electrical wiring. The installation of the Walabot app is the first step after buying the product. The app will then help the user with the visuals. They can even see through drywall and concrete boards. They also come with a protective plastic sheet. They even come with a protective case. Some devices aren’t compatible with Walabot. Apple devices are an example. This is a significant disadvantage for the product.
The user should calibrate the device before using it. The interface is also switchable, and the user can choose the best. The app can also take snapshots of the screen while scanning. A depth gauge is also present on the screen. It shows how deep into the wall, the detected material is. They can even help with light repair works. They can even help in hanging frames on the wall. They also come with a 30-day return policy. The Walabot introduced new advancements to its basic model. Later, they came in three variations.
The Starter Version
They are like the basic model. They can see through the wall up to four inches. They have an extra feature, which makes them discover breathing too. They can also detect motion inside the wall. This could be quite useful for monitoring areas where people are not allowed to go. They come with three extra antennas. This makes them very sensitive. They also have more accuracy and sharpness than the basic models.
This model had many differences from the basic model. This was a huge leap for the company.
The Creator Version
They have all the features available in the Starter model. They have better spatial sensing. 3-D tracking offers a broader and better view. They have better accuracy as they have 15 antennas. They can even reveal very slight threats due to the better view they have. They have useful imaging, but it is a bit expensive than the starter version.
The Developer Version
They have all the features present in both versions. They give better and accurate results. The detectors are more sensitive and tuned finally. They have the broadest range of frequencies. This is due to the 18 antennas in the device. They can offer raw signal information. They have one of the best high-resolution 3-D imaging. Whatever the type of wall it is, the clarity will be top class. The price may be a factor that may make the user think. But it’s worth the money for the quality.
All three models are convenient, but the price may differ by a large factor. The upgrade of each version increased the price too. This was due to the extra features provided.
- Powerful Infrared camera mobile accessary with adjustable one fit connector lets you find hidden electrical problems,...
- Image Capture – Up to 500 radiometric images. 4800 pixels capable of capturing thermal measurements from 14°F to...
- Temperature range: 4 degree F and 752 Degree F (20 degree to 400 Degree C). Measure temperature accurately and from a...
The Flir app helps the user to get the visuals. They are compatible with Android and Apple devices. The app shows the live feed from the camera. The use of MSX image processing is the reason for high -quality visuals. They help by combining the thermal image with a broad view of the device camera. They even analyze the contours in the visuals seen by the user from the camera. They display them as transparent lines to give the user a better view. There are nine different color palettes available in the app. Accurate temperature measurements can be seen by clicking a single button. They aren’t as precise as a thermometer, but they are accurate enough for use. The app can help in capturing photos and videos.
The app retains all the thermal imaging data. A single tap can take photos of the screen, and the user will be able to share it too. The ability to pick up different temperatures is a huge advantage for the device. It can help in plumbing and electrical jobs. The cool spots can identify leaks and weak joints. They were also modified in the later years. There were two new models after the Flir one.
Flir One Pro
They are one of the most potent consumer-level models. They have a more rugged look. The height and width are the same as the previous model. They use the same Flir one app like the other model. The thermal core has a much higher resolution than the previous model. They will show vague shapes on their own. The MSX image processing is like the previous model. But the thermal core gives better results.
They have four times the number of thermal imaging pixels than the other model. This helps in giving extra thermal details on the visuals. The objects which were not evident in the previous models could be detectable with this. These are the advantages of the additional thermal pixels. The thermal core helps in measuring objects three times hotter than the other models. It can measure a temperature range of -4 to 248 degrees Fahrenheit. They are the most expensive model. This is due to its high thermal resolution.
They are the best model among the three models. They are powerful for professional applications. They are suitable for higher-end applications. This is due to the high-level details they provide. The high thermal resolution is a big reason for this high quality.
Flir One Pro LT
This model is like a compromise between the other two models. It has a reasonable price for the features provided. The looks are the same as the Flir one pro. The thermal resolution is better in the Flir one pro. But the thermal sensitivity and pixel size are larger in this model. These thermal imaging specifications are the only differences this model has. They use the same Flir one app as the other two models. They have a price more than the Flir one but less than the pro model. This is better for occasional use. They have the quality enough for a consumer and worth the money the user pays.
The Flir one pro is the best model due to the high quality it provides. The other two are also the right choice and are very good for occasional use.
1. Can the products work while they are being charged at the same time?
2. Can the Walabot identify insects and animals?
3. Can the Flir one show anything through a window?
4. Should we pay to use the apps of the products?
5. Can all the phones use the Walabot and Flir one?
Both of these products are very good and handy. Walabot does the job by detecting with the help of radio waves. This can identify studs and pipes in the walls. They can go through drywall and concrete walls too. They can be handy before drilling works. They even identify termites in the walls. There are three different versions with unique features in them. The Flir One detects the objects beneath through infrared signals. This is not preferable for studs but is very good for detecting heat signatures. They can detect hot and cold spots through temperature differences. They can locate spots of heat transfer. They give accurate data in a matter of seconds. The thermal imaging gives high-resolution visuals to the user.