You will find some of the unknown special tips also that will help you to do your work with full accuracy. Whenever we need to cut down a tree, we should take care of many things like our safety, a fine cut, and less harm. Our process is very affordable, which means it will help you to reduce your expenditure to a great extent. It is effortless to follow this process sequentially. We will describe all the necessary steps on how to cut down a tree.
Recommended Chainsaws To Cut Down A Tree
How To Cut Down A Tree – Step By Step Process
Step 1: Cutting The Notch To The Felling Direction
After this, tie up your top of the tree with a rope. You should tie this rope such that the tree falls in the direction you wish. This rope will help you to fall the tree in the direction you wanted. You can use simple chainsaw to make the notch.
Step 2: From The Other Side, Cutting Towards The Notch
After that, take a very tight pull on the rope that you have tied to the top of your tree in the very first step. This will help you to get the right inclination of your tree without going in the wrong direction. So, the rope acts as a controller here and is a handy way to get a desired inclination of the tree.
Step 3: Falling Of The Tree
To prevent the sudden falling off your tree, leave a kind of leaving-hinge. You can do this only if you have not cut the notch in the previous step completely. This will hold the tree from falling into the side suddenly. Your safety matters a lot in this step because it may be fatal for your life, even with a little carelessness.
Step 4: After The Tree Falls
After this, you need to take the bow saws. These are a type of handsaws. You can also call them Swede Saws. Get a swede saw that can cut up to 8 cords a day or more. A tabular steel bow is excellent. It has a very thin blade under high tension. These blades can cut very thin kerfs by removing very little wood. A professional looking chainsaw would also do the job.
Step 5: Sawing Up From The Bottom Part
After sawing up from the bottom, saw down from the top part of your tree. You should do this until you get a good outcome. You can always cut down a notch instead of a single cut if the saw seems to be blinded.
Step 6: Checking Yourself From The Surrounding
Things You Would Need
- A couple of bow-saws
- A firewood
- A tree that you want to cut.
- A pair of sharp blades
- A pair of axes
- A long rope may be of about 2 to 5 meters. It depends on the height of the tree.
- Always wear the right safety gear while working.
- If possible, then buy a pair of felling wedges. This will prevent the saw from getting pinched.
- Estimate the zone by which the tree is falling.
- Clear the cutting zone to the maximum extent.
- Size up your tree. See the conditions of cutting down a tree.
- When the tree falls, make the notch depth 1/5th of the tree trunk’s diameter.
- Always plan the notch while planning to cut down a tree.
- Cut the notch carefully.
- Use the felling wedges on more significant trees.
- Draw the felling cut.
- Always look out your surrounding for your safety.
- Start with cutting the branches of the trunk.
- Saw the tree trunk into the firewood.
1. Which type of tree will be the best for cutting purposes?
2. How long will the whole process of cutting down a tree go?
3. Can we use a two-handed saw for this process?
4. Should we wear gloves for our safety in this process?
In the above article, we tried to give you the best insight into the usage of your tools in a better way. I hope you understood the proper setup technique for cutting down a tree properly, and it will help you to improve your cutting skills. Our article will help you to proceed in this procedure sequentially. So, if you want to go back to the previous step and rectify any mistake, you can easily do so. If you plan to use chainsaw for the purpose do read our post on chainsaw techniques.
You need not get confused about the whole procedure where to start with. Go step-wise and analyze your understanding. It is not at all difficult to cut down a tree properly with the tools that you have. It is just that you need the right way to proceed in this, and you will be glad after doing your task correctly and better.
We look forward to writing such articles if it helps you in some or the other way—all the best for your tree cutting setup and process.