Wen 4208 Vs 4210 Vs 4212 Vs 4214: Which Is The Better Product?

Wen is one of the leading brands of the speed drill press. There are many drill press launched by the company. This article talks about the four best drills wen 4208, wen 4210, wen 4212, and wen 4214. If you are planning to buy one of them, this article on comparison of Wen 4208 vs 4210 vs 4212 vs 4214 will help you a lot. The article gives an in-depth review of the tools.

Our Verdict

According to us, all four are a good purchase. The purchase here depends upon the usage. The person who is buying the machine should decide beforehand.  The points to be covered are the field of work. The person should decide the qualities they need in the machine. In our opinion, Wen 4214 is the best. If you have a budget, you can go for this machine. This tool solves every purpose. The tool is a bit expensive but solves the purpose. It has every advanced feature that you need in a drill press. The speed is good. The motor is powerful. The speed range is better than the other tools. The entire tool has advanced features that you need.

Wen 4208 Vs 4210 Vs 4212 Vs 4214: Comparison Chart

Wen 4208 Vs 4210 Vs 4212 Vs 4214: Differences

• The keyed chuck size in each of the tools differs. Wen 2408 has a chuck size ½”. This one has the smallest chuck size. Wen 4214 has the largest chuck size of 5/8″. Wen 4212 has a chuck size of ½”. Wen 2410 also has a chuck size of ½”.
• The swing size also differs in each model. Wen 4214 has the wing size of 12 inches. Whereas the swing size of wen 4208 is 8 inches. The other two tools when 4210 has a size of 10 inches. The tool Wen 4212 has a swing size of 10 inches.
• The variable speed also differs in each device. Wen 4214 has an infinitely variable speed. The speed range from 580 RPM to 3200 RPM. Wen 4208 has a 5-speed variable speed. The speeds are 740 RPM, 1100 RPM, and 1530 RPM to 3050 RPM, 2100 RPM, and 3140 RPM. Wen 4210 also has five variable speeds. The speed range from 570 RPM to 3050 RPM. Wen 4212 has an infinite variable sped. The speed range from 530 RPMS to 3100 RPMs.
• Wen 4214 uses spindle taper MT2. While the other three uses JT33 as their spindle taper.
• The height also differs in each model. Wen 4214 has a height of 37″. Wen 4208 comes with a height of 23″ wen 4210 has a height 27″. Wen 4212 has a height 36″.
• Drilling capacity also varies in each model. The highest drilling capacity is of wen 4214. The capacity is 3-1/8″. The lowest drilling capacity is of wen 4208. The capacity is 2″. Wen 4210 has a drilling capacity of 2-1/4″. Wen 4212 has a drilling capacity of 2-5/16″.
• Except for Wen 4208, all other Wen models have laser targeting systems, which makes others more convenient to use.
• The weight of each model also differs. The bulkiest one is Wen 4214. This tool weight around 95 pounds. Wen       4208, weighs around 35 pounds. Other two tools Wen 2210 and Wen 4212 weight around 58 and 70 pounds.

Wen 4208 Vs 4210 Vs 4212 Vs 4214: Similarities

The tools lack similarities more. There are many differences. The tool has gone through much advancement. There are fewer similarities between them.

1. All the tools have the same table bevel level. The bevel is 445degree.
2. The motor vat is also similar in the four tools. The vats are around 120. Which is a basic unit decided?
3. The three of them can be used in big industries. The specification is more or less worthy for the industrial purpose.

Wen 4208 Vs 4210 Vs 4212 Vs 4214: Overview

Wen 4208

Wen 2408 comes with an 8-inch swing. This comes with a 5-speed drill. This can drill surfaces like metal wood and plastic. This work precisely. The holes made by the tool are precise and perfect. The frame consists of cast iron; this ensures durability and stability. The tool includes ½ inch keyed chuck. It has onboard key storage. It operates at five different speeds.

It starts at 740 RPM and ends at 3140 RPM. In between, the speed varies from 1100 RPM, 1530 RPM, and 2100 RPM. The chuck capacity smallest is 1.5 mm. The largest chuck capacity is 13 mm. The chuck capacity is adequate. The spindle of the tool can travel up to 2 inches. The device can easily read it. The tool also comes with an inner depth stop. It helps in controlling the tool and has precise holes. The linear stop helps in accurate and repeatable drilling. It has a 2.3 amp inductions motor

and develops a sufficient amount of torque and power. The drill press height from the floor is 23″. This comes with the spindle taper JT33. The drill press is good to work with; the machine doesn’t need experience working with it.

Wen 4210

Wen 2410 comes with a JT33 spindle taper. The accessory gets a wider range to perform with and offers 5-speed ranges. The range starts from 570 RPM to 3050 RPM. It also has a rigid frame that has an iron cast that provides sturdiness and reliability to the tool. The induction motor comes with a ball bearing.

It also makes sure the tool works softly. The X pattern laser lock helps in saving on guesswork. This helps in more precision. This also comes with linear scale depth adjustment. This sets the depth of drilling. This helps in the making of precise holes. This also ensures the repetitive working of the tool. This has ½ inch keyed chuck.

This enables the use of large diameter bits. This provides versatility to the product. This tool has a cast iron base. This helps in marinating the stability of the tool. It also helps in benchtop clamping. This has a worktable bevel up to 45 degrees. This ensures both the sides left and right. This helps to work with tricky materials.

Wen 4212

Wen 4212 is the advanced version of the last two tools. The tool comes with a 10-inch swing. This is having a variable speed drill with a laser centering device. The bench tops cast of the tool helps in drilling the iron, metal, wood, and plastic surface. The maximum drilling capacity in a thick iron cast is 5/8″ in 1″.  There are no pulleys and belts to change while working. This also comes with a JT33 spindle taper.

This gives the tool to perform various tasks. The induction motor is powerful. This ensures smooth working even at a higher speed. This has a worktable bevel up to 45 degrees. This solves the tricky work. This also has a digital readout. This displays the running speed of the device. The base of the tool has pre-drilled holes. This helps in mounting onto a bench and work stand.  This comes with an X pattern laser lock. This ensures the saving on guesswork. The machine has an infinitely variable speed range.

The range starts from 530 RPMS to 3100 RPMs. The variable speed delivers the same torque. The speed is displayed on the led screen. Tre drill press height from the base to the top is 36″.  The smallest chuck capacity is 1.5mm. The largest chuck capacity is 13 mm approx.

Wen 4214

Wen 4214 is the most advanced tool in comparison to last thee. This is the advanced version of all drill press. This comes with a 12-inch swing. This tool has the entire feature that you need in a bench press. This has all the features in wen 4212. The improvement in the tool is the power of the tool. The variable speed of this tool is infinite. The speed range starts from 580 RPM to 3200 RPM. The device has a powerful motor.

The ball bearing of the motor helps in the extended life. This helps to enable smooth working with the device. This also comes with an LED display. This shows the speed of the drill. The mechanical variable speed of the tool exerts equal; torque. This tool can be used with other attachments like drum sanders and circle cutters.

This also has a worktable bevel of 45 degrees. This solves working on tricky surfaces.  This has 5/8″ keyed chuck. This helps in using more significant bits with the tool. The drill press height from the floor is 37″. The minimum chuck capacity is 0.8 mm. The maximum chuck capacity is 16 mm.  The spindle taper used in the tool is MT2.

Wen 4208 Vs 4210 Vs 4212 Vs 4214: Pros And Cons

Wen 4208

Pro- Wen 2408 has a cuck size of ½”. This comes with onboard key storage. The smallest chuck capacity is 1.5 mm. The maximum chuck capacity is 13 mm—spindle taper of the tool travel up to two inches. The machine operates on 5-speed ranges. The speed range starts from 740, 1100, 1530, 2100and ends on 3140 RPM. The tool has a size column ¾.  The spindle taper used in the device is JT33. This has a 2.3 amp inductions motor. The drill press height is about 23″. This machine is excellent for beginners. If you are learning, you can go for this device. The device is affordable comes in an acceptable range.

Cons- the device is beginner-friendly, but for industrial purposes, the specs are bit low. The device lacks a laser targeting system. This device is less versatile compared to the other drill press ( also compare with milling machine). The device is useful, but not great.  It is the smallest version of the other devices. This is the primary tool for drill purposes.

Conclusion- The device is beginner-friendly, as discussed. If you want small work, you can buy this. This is affordable. This will help to learn and understand the device. This is an excellent tool for a startup. If you don’t want to invest much, go for this.

Wen 4210

Pro- Wen 2410 also comes with a 5-speed range. The range starts from 570 to 3050 RPM. This has all the specs that Wen 4208 has. The addition to the tool is the laser targeting system. This helps in less guesswork. The precision of the tool is excellent. There is a bit of advancement done to the tool. The tool is heavier than the last tool. This has ½ inch keyed chuckhole. This also has a JT33 spindle taper. This works well on metal, wood, and other surfaces. This also can work with optional accessories.  This has a 3.2 amp motor.

Cons- the device is excellent, but there is a little add on done to the tool. The advancement could be done on the tool. Overall the tool is perfect. But the specifications aren’t that great. In the tool, you have to change the belt manually. This cannot perform well on thick metal. Steel related projects are a bit dangerous to work with.

Conclusion- the devices are essential. You can buy it if you do not have heavy metal works. If you want mid-range drill press ( see how it works) this is good. You can consider Wen 4212 also. The entire device is useful.  The fact that makes you worry is the manual work.  You need to change the belt while working on it.

Wen 4212

Pro- Wen 4212 comes with an infinitely variable speed. The speed ranges from 580 to 3100 RPMs. The tool is excellent for all the drill purposes. It has 4.2 amps of motor. This is a quite efficient motor. This also has the spindle taper JT33. The device works great. It has a 12-inch swing. This comes with laser centering. The device has the height 36″. The tool is excellent for industrial purposes. The workbench is suitable. The worktable bench is made up of cast iron. This makes the tool durable and works for a longer time.

Cons- The only con in the device is the table adjustment. This can bring slight breaks during work. It is difficult to adjust the tool. It needs more power to adjust it. This isn’t great for CNC level projects.

Conclusion- the tool is excellent. This has all the requirements fulfilled. The machine works great. It has every single feature that you need. The only thing is the adjustment. This needs a muscle to work with. The tool is heavy.

Wen 4214

Pro- Wen 4214 is the most advanced tool. Comparing to three of the tools, this is the best. It has a variable speed range. The range starts from 580 to 3200 RPMs. This device has everything that you need in a drill press. The quill diameter is 2.7 inches. It comes with an MT2 spindle taper. The device has laser module class 3. In all, this is the study tool.  The durability is long.

Cons- The only con with this machine is the limited performance. This tool is a bit back when it comes to precise mining. The only drawback of the tool is this.

Conclusion- the tool is great. This is the best buy. The only thing is this tool is an investment. The tool can perform all the work. The drill press is a great buy.

Wen 4208 vs 4210 vs 4212 vs 4214: Features

Wen 4208

Wen 2408 includes a 1/2-inch keyed chuck. This also has onboard key storage. The minimum Chuck capacity is 1.5mm. The maximum 13mm. This tool operates at five different speeds. The speed ranges are 740, 1100, 1530, 2100, 3140 RPM. The spindle travels up to 2 inches. This also has a linear locking depth stops. This ensures accurate and repeatable drilling operations. This comes with a 2.3 amp induction motor. The bevels are up to 45 degrees left & right. This has Spindle Taper JT33. The drill press Height from the bottom 23.”

Wen 4210

Wen 2410 comes with five variable speeds. The speed ranges from 570 to 3050 RPM. It also has a linear scale depth adjustment. This helps in setting the depth of the drill bit. This helps in precise and repetitive drilling. The tool has 1/2 inch keyed chuck. The key storage is also included. The tool has a Cast iron base. It also has mounting holes. This provides stability and easy benchtop clamping. The bevels are up to 45 Degrees left & right.

Wen 4212

This tool comes with an infinitely variable speed range. The speed ranges from 530 to 3100 RPMs.  The Mechanical variable speed delivers equal torque throughout the range. This also has a LED readout. It displays the speed of the tool. This also comes with a Spindle Taper JT33. This also has a Laser target feature. Drill press Height from the floor is 36 inches. The minimum Chuck capacity is 1.5mm. The largest chuck capacity is 13mm.

Wen 4214

Wen 4214 also comes with an infinitely variable speed range. The speed ranges from 580 to 3200 RPMs. The Mechanical variable speed delivers equal torque. This also has an LED readout display. The Quill Diameter is about 2.17″.  This comes with a Spindle Taper MT2. Drill press Height from the floor is 37″. The minimum chuck speed is 0.8mm. The maximum chuck speed is 16mm.

FAQs

Final Verdict

According to the above comparison, wen 4214 is the best buy. The tool has everything that you need. The specifications are excellent. For beginners, wen 4208 is remarkable. It is an affordable user friendly. You can learn using the tool. Another two tools are also great. If you want the best investment tool than wen 4214 is best. So before buying the tool, decides the purpose you are buying for. For heavy industrial work, when 4214 is the best. For beginners, 4208 works best.