Beautify your garden, pool area, or patio with admirable colors of flagstone. Held together with silica. The flagstones are nothing but sedimentary rock formed by combining feldspar and quartz. Small projects like garden roads with uneven stone paving look wonderful. But how to cut a Flagstone? Follow our detailed guide which includes steps as well as things you need.
How To Cut A Flagstone- Step By Step Guide
Cutting Regular Shape
To cut regular shapes from flagstones, a circular saw can be used. Remember, the circular saw must be equipped with a masonry blade. Well, these cut pieces of flagstone can be used for small projects. It can also be used for cutting airstones and asphalt. Decorating your fireplace can be an option.
You would be using a power tool i.e., a circular saw for cutting regular pieces. It suggests while you lay the flagstone on a hard surface, don’t forget to clamp. The solid surface needs clamps to hold the flagstone firmly.
Measure and draw a distinct line to cut.
Run your circular saw along the line drawn.
The weight of the saw is enough to score the flagstone. You need not put extra pressure. The stone may break if repeated blows of chisel and hammer are applied.
Place the scored piece of flagstone at an angle on a brick. The brick acts as a prop to achieve the final result. The bottom side of the stone should be rested on the brick.
Finally, to remove the extra piece, gently tap on the scored line.
Cutting Accurate Shapes
For the heavy jobs that need accurate design cuts, the wet saws are perfect. A place like a patio floor, pool deck, or curves needs accurate shapes of flagstone. Wherever you want a color scheme, accurate flagstones are needed.
Suppose you don’t want debris to form, the use of lubricants while cutting can help. If water fed saw is available, the mission can be achieved. Either renting or buying a water-fed saw provided with a diamond-edged blade can be used.
It would be wise to read through assembly manuals to use the saws correctly.
Use a measuring tape to measure. Also, mark the line to score.
The wet saw is incapable of moving, so it would be better to push the stone steadily against the saw blade.
Continue to push straight and steadily through the saw till cutting is complete.
When cutting is over, it’s time to clean and store the tools.
Things You Would Need
1. The Flagstone
These are colorful sedimentary rocks that can be used for decorating. For example, garden paths, pool deck, and patio. They can be regularly cut or regularly cut all depends on the design required. They are functionally super as well.
2. A Measuring Tape
These are very vital to include mortar and joint spacing.
3. A Chalk Or Slate Pencil
The measuring tape accompanies the chalk and slate pencil. They produce distinct marks. Scoring needs to get done with the help of markups.
4. Hammer And Chisel
For irregular and regular flagstone blocks are hammer and chisel get needed. They are helpful in scoring activities. They are widely used to remove an excess portion of flagstones beyond cutting limits.
We can find the use of bricks as props. They are used in forming regular cuts. To finally, remove the extra piece by tapping with hammer and chisel. The flagstone is laid in an inclined position on the brick.
6. Wet Saw And Water-Fed Saw
For accurate cutting of the flagstone, a wet-saw is found suitable. Moreover, a water-fed saw with a diamond cutter enables you to clean cutting without debris. Whether you rent or buy this type of saw, they are suitable for larger projects.
When you are involved with regular cutting, you are using power tools like a circular saw. It would be essential to hold the flagstones firmly onto the solid surface. Here the clamps would be required.
8. Circular Saw
When cutting regular shapes, you are probably using a circular saw. Once measurement and marking activities are over, the circular saw is used to score as per markup. Clamps must be used while using the saw.
As power tools like saws are being used for cutting, the protection equipment must be used. Glasses, gloves, earplugs, a proper suit, and pants applicable to HSE must be ready. Over and above, the cutting of the flagstone is known to be dirty. Hence, protective clothing, including gloves, must be there.
10. Time In-hand
The cutting of the flagstone is time-consuming. Before deliberation, you must have a proper attitude and stamina to complete the task.
1. How are natural stones better?
Natural stones are much more colorful. They can retain their beauty through ages. In comparison to a manufactured product, they are much more durable.
2. What is the lifespan of natural stone?
Natural stones are eternal. Old relics can find the use of natural stones.
3. Can flagstones around the world ethically get sourced?
The answer would be yes. The queries are regularly audited, and certified products get delivered.
4. How is the tonnage of the flagstone requirement calculated?
It depends on the size of the feet. Multiply length and width; you arrive at square feet. Next, divide the result with coverage. You get the answer.
5. Can the flagstone be cut using an angle grinder?
Yes, angle grinders can be used but stay cautious of the blade. Use diamond cutter blades. Woodcutting blades would get dull as soon as they are used.
6. Is it possible to drill holes in flagstone?
Yes, you can. Use hammer drills. They are provided with special kinds of bits. Place the drill bit on the stone. Increase speed as you insert. Keep pressure till you pass the thickness of the stone.
After you learn how to cut a Flagstone you can explore opportunities to decorate our surroundings with this treasure of nature. The flagstones are known for having varieties of color. These Simple sedimentary rocks can brighten up your garden path: your interiors, pool decks, or patio. Simple hammer and chisel would work brilliantly for small jobs. For a more accurate and larger number of cuts, a wet saw is used. You can create a huge difference using color variations that flagstones can offer.