How To Build A Goat Fence?

Building fence doesn’t ask for your educational degree. It just depends on your experience and interest. But it is a very tricky task to keep the goats properly. You cant leave them in the open. There should be proper fencing. You should build a one if you don’t have it already. In this article, we will try to help you out with this fence building task.

You need to take care of a specific job. You may feel that the task of building a fence for your goat cannot be done by you. But it is doable and fascinating if you follow the right procedure instead of a complex one. If you want to learn how to build a goat fence, then follow this article completely.

How To Build A Goat Fence Using Different Methods

Lets look at some of the different methods to build goat fence:

Method 1: Fencing Through Steel Panels

You will find cattle panel more durable and flexible when a goat tries to escape off by jumping through it. You can also prefer these panels to contain your bucks. They are generally higher in dimension, so they are more capable of keeping the animals in. Fencing is not just to keep the animals inside but to protect them from outsiders. Any animal from outside also should not be able to enter the field through fencing. You should take care of this point while designing the fencing.

Method 2: Electric Fencing

Electric fencing is an immaculate method of building a fence for animals. It is used to clean up bushy areas also. We can use a good trimming with this type of fencing. You can also use it to clear those areas that are not fenced. Also, the top hot wire will be an additional tip. It will keep the animals from climbing the fence and keep a bouncy animal inside. They can’t escape from this type of fencing with ease.

 If you want to use this method, then the process is given below.

Step 1

Initially, you have to place your panel on level ground and try to fold it once. Now, try to cover any plastic material using this panel.

Step 2

Then, you need to tie up the netting down and keep it in your basement. You can use it throughout the winter season without any issue.

Step 3

If you do not take proper care of this thing, then the fencing will be freed. It will lose all its properties and may break unexpectedly. Then you will be wasting the right amount of fencing.

Step 4

Go for steel panels if you want to finish the work with less cost. But they are easy to use and are more secure than the steel ones.

This type of fencing is suitable for a person who doesn’t have many animals and land. This fencing is very easy to handle when compared to other methods. If we want, then it can be moved up, set up, and train on quickly. And the most important thing is that this electric fencing is perfect for almost all kinds of breeds.

If you are using this method, then you don’t need to overthink. In another fencing, you need to make the dimensions, thickness according to your goat breed. But this type of fencing is applicable for many breeds because it doesn’t create any specific disturbance to any one of them. If you want to get rid of many such steps, then this method is for you. 

Method 3: Fencing By High Tensile Wire

• So this method is likely to be a permanent method of fencing. It works well if you are working with a large section of pasture. Due to their high tensile strength, they last for a longer duration than the other two methods. They come with full strength and can tolerate a large number of animals. You can install these wires by yourself easily. But you should not do it until you know the correct procedure. Otherwise, you will end up just making a playground for your goat. An excellent option for permanent fencing that is very secure is of this type.
• If we talk about the procedure of installing them, then you need to seek help from some experts. Because fixing up, high tensile wires are complicated than the other two methods mentioned above. Never do this step alone. Otherwise, you will end up wasting too many materials. You cannot use regular cutting or bending tools here. So, make sure that before starting this process, you have its relevant devices.
• You should go to this method only if you have many goats. Otherwise, go for the other two methods because this method is a little complicated than other methods. And doing this for a small number of goats will not be a wise decision. So, think about which type of fencing your goats need. Accordingly, choose the best method as per your requirement.
• You need to consult some professionals for this method even if you know how to it. Before starting this, inform at least one person who is doing this job for an extended period. It will help you in case if you find any difficulty while fixing the high tensile wires or something like that. Keep yourself safe throughout the process. Never perform any task at your own risk. It may be fatal for you.

What To consider While Building a Goat Fencing

There are many things that you need to consider while building the fence. You should keep the essential things in your mind. There are some universal bases to cover. It doesn’t matter which method or which material you are using. But you should be following the primary and essential steps that are required. You should also focus on the area of goat fencing. One goat can manage 250 sq. feet of outdoor spacing. 

Because you are not keeping one single goat in the fence, you need to plan it accordingly. You should calculate correctly how many goats can accommodate in one single fencing. This will help them to work correctly without interfering in other’s work. If you keep too many goats, then they may fight again and again and can cause damage to the fencing. If there are very few goats in the fencing, there is no point in keeping the fence. It will be less efficient. So, divide the fenced area equally among all the goats.

Things You Need To Build a Goat Fence

For preparing a proper goat fencing, you should use the best-qualified tools and devices. Otherwise, it will be difficult for you to work with such a huge task. You should do every task with proper finishing. You cannot use any random and dull tools for it. You can always use some better alternatives if you don’t have the devices mentioned below. These tools are standard for all three different ways of fencing. We have mentioned all the possible tools that you will need if you go by any one method. Arrange the following items if possible:

• Netting of electrical fencing
• Some steel panels for the steel fencing
• Any wire that has a high tensile strength
• Appropriate cutters that can be used to cut fencing wires and other materials.
• Stakes
• Some safety types of equipment
• One marker
• Measuring tape

Tips

These are some of the tips that will help you to do your fence building job with ease. Sometimes, you make the easy process very complicated by not following these tips. So, try to apply them while building your goat fence:

• You may feel that the goats will not be able to get out of fencing, but that is not true.
• You do not need to put all types of goats into the fence. Some goats don’t require any kind of fencing. They just roam around and come back after some time. These breeds have human temperament and love to be around us.
• Never put so many goats into one fencing. This can create destruction on the fencing side. You should keep the correct number of goats. The number should not be less, and it should not be more also. They should get their personal space properly. They don’t like to be in a tiny place altogether.
• Always build the fence according to your needs. It shouldn’t be made on an imagination. You should build that will fit with your goats.
• While making a fence, be careful about your safety.
• When you perform this process, you should not stand barefoot. Otherwise, the small particles of the pipe may harm your feet. Properly cover your feet. If possible, then wear shoes while cutting the workpiece. And do not forget to work with proper protective equipment. If you do not do so, then it may be fatal for your body. There are specific harms like numbness due to high sound, respiratory problems, and other such cases.
• Be flexible. Do not stick with one idea. You may fail in the first attempt but try doing it again in a better way. Always prepare yourself for the worst. Your main aim is the safety of your goats. So keep that in mind.
• While working with the electric fence, keep it trimmed so that you can know how to keep goats in electric fencing.

FAQs

Final Thoughts

While building goat fence use proper tools and devices, you can turn the non useful pieces into nice fencing. And you will surely appreciate yourself when you will see such beautiful fencing in front of your eyes. It is not a lame joke to do this. Just by sequentially following the proper procedure, you will not feel that you are taking up a challenging task. So, enjoy your fence building process and teach others also.