The Drill doctor brand is highly known for drill sharpeners that are suitable for sharpening bits of high-speed steel, Masonry, TiN-coated, carbide, cobalt, and parabolic twist drills. They are handy, modern and can be used for almost any workshop. Here we are, comparing Drill Doctor, DD500X Vs DD750X, which are one of the best sharpeners.
Contents
Our Verdict
After comparing Vs DD750X, we realized that we prefer the dd750x model since it has larger included chuck and greater cutting flexibility both the models are great they are quite similar in terms of durability, accessories, and mainly sharpening ability of a variety of bit types and sizes read on to find out why we prefer the dd750x.
From this chart, we can see that there are individual differences and similarities between dd500x and dd750x. Let us look at those similarities and differences in detail.
Factor’s To Consider While Comparing Drill Doctor DD500X Vs DD750X:
The dd500x works for bits of size up to ½ inch bits, while the dd750x supports ¾ inch bits. Because of the flexibility, the dd500x can also go up to ¾ inch bits with the help of a ¾ chuck accessory; however, this is an additional purchase. The dd500x is cheaper than the dd750x, so if you are not using bits more than ½ inches, you should buy the dd500x model. But if you are working with bits of ¾ inches then buy ss750x model
2. Simplicity In Use
When buying a tool, it is essential to consider if you are going to use that tool or would it be left unused cause it is difficult to use now. However, the drill sharpeners are easy to use tools they come with manual guides, it can get messy and complicated if not used in the right way. The Drill doctor dd500x is easier to use since it comes with two angles; the fewer things a tool does, the easier it is to use this tool is less intimidating for new users. The Drill doctor dd750x is a little more difficult to learn since it has more features and flexibility, so for a person who is experienced and has some knowledge in this field, it would be easier for them to use as compared to a beginner.
3. Case
The Drill Doctor DD500X comes with a bag to easily transport It from one place to another, but if you want a case/ bag for Drill Doctor dd750x you need to purchase it separately
4. Warranty
both these models come with a warranty of 3 years so in case you need to replace certain parts there is no additional expenditure for that with the warranty you can replace it at zero cost
Let’s look at how Drill Doctor DD500X Vs DD750X far when we compare them head to head.
Angles: the Drill Doctor DD500Xcan drill bits at either 180 or 135degree angle while the dd750x has more options. It can drill bits between 115 to 140 degrees.
Bit size: the dd500x has a bit size up to ½ inches only while the dd750x has a bit size up to ¾ inches.
Simplicity: although both tools come with instructions on how to use the dd500x is simpler to use, it is advised for beginners, it has fewer settings.
Case: the dd500x does not come with a, but the dd750x comes with a case for extra protection.
Greater flexibility: here, the Drill doctor dd750x is the winner since it is more flexible since it offers custom angles and can be used for everyday use.
Drill Doctor DD500X Vs DD750X: Similarities
Drill bit type: both these models have the same drill bit type that can be used they are Carbide, Cobalt, High-Speed Steel, Black Oxide, TiN-Coated, and Masonry.
Sharpening wheel: both the sharpeners have a replaceable diamond wheel. Every wheel has around 200-uses before you will need to replace it. Both dd500x and dd750x will arrive with a 180-grit, which is pre-installed later on; you can purchase the 100-grit.
Secure chuck design: both these sharpeners are designed to secure even the thinnest bits; this prevents them from twisting or wrapping. This design ensures that the bits last longer even after they are sharpened multiple times.
Length: both the sharpeners have a length of 5.5inches.
Both can split the point of the drill, meaning it’s a self-centering drill.
The diamond wheel present in both these tools can be easily replaced as it comes in 2 compatible grit options.
They are compatible and are the current model of doctor drill accessories present within both the dd500x and the dd750x tool sharpeners is a magnet motor that helps in superior performance.
Design: both the dd500x and dd750x sharpeners have a sturdy design, which means that while using these tools, they do not shake these tools have a broad firm base. This extra stability also helps reduce the noise, which is produced while sharpening.
Operation: essentially, both the dd500x and dd750x operate in the same manner.
SHARPENS STANDARD DRILL BITS: The DD750X drill bit sharpener sharpens twist bits from 3/32" to 3/4". This professional...
SHARPEN & SPLIT: Sharpen all common twist-style drill bits and split the cutting tip to reduce wear and increase the...
SHARPENS TO 115-140 DEGREES: Accommodates all common bit angles to tailor to whatever you need to ensure your bit is in...
It has the Drill Bit Capacity between 2.5mm – 19mm
Voltage is 240V
It is a single phase
The angle is between 115° – 140°
Why Should You Invest In A Drill Sharpener?
Drilling is a part of daily construction work, and sometimes the drill bits can wear off and break when used roughly. Many users have numerous bits at hand in case a bit gets worn out, but to eliminate that extra cost of shopping, this is where a drill sharpener comes handy. Cost-cutting is not the only benefit of a drill sharpener; it adds quality and so much more.
We have researched and found two best drill sharpeners in the market today; they are dd500x and dd750x. They are from one of the first companies who started manufacturing drill sharpeners, the Drill doctor. These sharpeners help get work done faster.
About Drill Doctor
Before you invest in a brand, we believe that it is essential to know a few facts about that brand, so we have researched the most famous brand that offers drill sharpeners.
The Drill Doctor
Drill doctor by Professional Tool Manufacturing LLC is a worldwide brand that is available in most countries; they offer a variety of drill sharpeners and accessories that can be attached to these sharpeners. They have sold over 2 million products to date.
They manufacture four models-
DD350X
XP Series,
DD500X
The sharpeners they manufacture are of great quality, are versatile and flexible any model of sharpener you buy from this brand will be helpful. We have specifically chosen two models from this brand and did a full review on them.
Why Use A Drill Sharpener?
The only alternative of not using a drill sharpener is buying new drill bits. Drills are used daily, sometimes used for rough work, and sometimes for easy small jobs, it is very common for drill bits to get blunt and worn out. So instead of spending time shopping for a new drill bit, which is a lot of effort. It involves finding a store that sells the required bit then ensuring that the bit fits the drill; all this can be time-consuming and expensive. Which is why we prefer a drill sharpener; this is a onetime purchase. It is easy to use, flexible and works with a lot of different materials.
A drill sharpener sharpens the drill bit in less than a minute, so you don’t waste time while working. It comes with a warranty of 3 years it is replaceable and accessible. It saves time and money, plus it improves the quality of the drill bit.
About Drill Bits
Drill bits are cutting tools that come in different forms and shapes; they help to create holes in other materials. We are going to see about a few drill bits-
1.Standard Point: The standard bit is made from high-speed steel and sometimes is coated with TiN; they are used for drilling into soft and mild materials like rolled steel, aluminum, or wood.
3.Split Point: This drill bit has an additional set of cutting lips; it allows you to drill faster. All these drill bits can be sharpened with a drill doctor sharpener.
Drill bit sharpener for high-speed steel, masonry, Carbide, Cobalt, and tin-coated drill bits
Sharpens 3/32-inch to 1/2-inch standard twist bits and can create/remove split points
Set point angles at 118° or 135°
The Drill Doctor DD500X model was designed for flexibility and reliability. It can sharpen a wide range of bits from 3/32 inch to ½ inches. It comes with two sharpening angles at 118 and 135 degrees. They can work on a variety of materials like carbide, cobalt, steel, black oxide, TiN-coated, masonry bits, and twist. It is a versatile sharpener for everyday use, and it has the durability and flexibility that is required for sharpening a large range of broken and dull bits. It weighs about 7.2lbs.
It comes with a longer chuck jaw, which helps to hold the bits more precisely and a permanent magnet motor. It can also sharpen split-point bits. It is a very convenient tool that you can use at home, work, garage, or a shop. A professional, DIYer, and even a beginner can use this sharpener.
It works in 3 easy steps.
Align
Sharpen
Split
This model is designed in a way that it ensures that the bits are held in place while sharpening and stays cool when in use. This model can sharpen 200 times, and it quick and easy to change.
SHARPENS STANDARD DRILL BITS: The DD750X drill bit sharpener sharpens twist bits from 3/32" to 3/4". This professional...
SHARPEN & SPLIT: Sharpen all common twist-style drill bits and split the cutting tip to reduce wear and increase the...
SHARPENS TO 115-140 DEGREES: Accommodates all common bit angles to tailor to whatever you need to ensure your bit is in...
The Drill Doctor dd750x is a professional, easy to use tool which makes drill sharpening more accurate. This sharpener can sharpen bits at any angle between 115 to 140 degrees. It can sharpen carbide, cobalt, steel, black oxide, twist, masonry, and TiN-coated. It is capable of sharpening bits at 3/32 – ¾ inches. This model is built tough, which makes it last for a long time. It weighs around 7.2lbs.
It comes with a longer chuck jaw, which helps to hold bits more precisely. It can create and sharpen split-point bits, and it is easy to replace the sharpening wheel. This drill bit sharpener allows you to control the amount of material to be removed while sharpening so it can fit individual needs and extending the life of the bits while keeping them sharp. This model comes with a case so you can store it safely when not in use.
It can sharpen High-speed Steel, Carbide, Cobalt, TiN-coated and Masonry bits
precision, and adjustability
it has Longer jaws which hold the bit more precisely
it has a cast aluminum point angle shuttle which adds durability
DD750X:
This tool can work on TiN, iron, cobalt, masonry and other metals
It is lightweight and portable
It comes with a Customizable feature that enables the user to bend it at any angle
This model Operates smoothly at 110 Volts
It is easy to replace the sharpening wheel
Comes with a case which ensures that it is stored properly
DD500X Vs DD750X : Limitations
DD500X
Unable to sharpen bits more than ½ inches you have to buy additional ¾ inch chuck
Can Only sharpen bits to 118 or 135 degree
No case
It takes some time to adjust to
DD750X
This model can take to adjust to suits more for professionals
It does not have the plastic case which could be of better quality
When you purchase these models online, you will see that there are the dd500x and dd750x but also the dd500x with extra wheel and the dd750x with an extra wheel. This means that both the models have the option to be purchased with extra wheels, so if you will use these sharpeners regularly and require the extra wheel, then you should purchase the models that come with the extra wheel.
FAQs
1. What is the shank size of dd500x and dd750x?
The dd500x has a shank size of ½ inches, and the dd750x has ¾ inches.
2. Does dd750x has its case?
Yes, the dd750x package includes a case.
3. Instead of buying a new bit, should I sharpen it?
Yes, we prefer sharpening an old bit rather than buying a new one when you sharpen the old, but it saves a lot of time and money that you would have to waste in buying a new one, and bits always tend to get worn out, so it is better to invest in a drill sharpener.
Final Talk
We all have old worn out bits at home, so instead of tossing them out the window and replacing them with new ones, it is time to sharpen those bits and reuse them. The dd500x and dd750x are the best drill sharpeners in the industry today; they are flexible, portable, lightweight, and easy to use. When we compared Drill Doctor DD500X Vs. DD750X, we prefer the dd750x model since it does everything the dd500x does and more.
But the dd750x model can be a little complex to use, so if you are not a professional or someone who does drilling every day, then you should buy the dd500x model since it is more suitable for beginners. The dd500x model is also very reliable, durable, and it is much cheaper than the dd500x and easy to use which every model you end up buying will save you a lot of money that would otherwise be spent on purchasing new bits thus making it cost-effective
DD750X Drill Bit Sharpener - Editor's Choice
4.9
Summary
The Drill Doctor dd750x is a professional, easy to use tool which makes drill sharpening more accurate. This sharpener can sharpen bits at any angle between 115 to 140 degrees. It can sharpen carbide, cobalt, steel, black oxide, twist, masonry, and TiN-coated. It is capable of sharpening bits at 3/32 – ¾ inches. This model is built tough, which makes it last for a long time. It weighs around 7.2lbs.
Leave a Reply