Best Sawzall Blades In [year]

Are you a frequent user of Sawzall? Do you want to select the best Sawzall blade for your machine? Then we know it is quite a difficult task to choose the best blade. Here, our team has conducted a test of 2 months to select the top 8 Sawzall blades. Even we have selected Milwaukee 2727-21HD as the best product based on its material, teeth per inch, Length, and PVC qualities.

Best Sawzall Blades

1. Milwaukee 12PC Set Sawzall Blades For Metal/Thick Metal

We have picked this Milwaukee Sawzall blades as the perfect option for dealing with metal and thicker metals. It contains a total of 12 blades of different sizes and TPI and one storage container. The reason to consider it as the perfect option for cutting metals is its four pieces of  6 inches 18TPI and two 9 inches 14TPI blades. 

We have used it with our Dewalt 20V Sawzall to cut some aluminium rods. It was quite easy to install it in our reciprocating tool. The thickness of the rod was around 4 inches, and it became quite easy to cut them with a six inches larger Sawzall blade. Six inches length is not too short nor too big, and that’s why it was able to reduce vibration and rigidity.

The 18TPI blades worked well during our trial session. But in our opinion, if the set holds two pieces of 6 inches and 2 of 9 inches instead of four similar sizes. It would be better to deal with more thick metals as one cannot use it to cut the thicker metal that is larger than 4 inches in diameter. 

Apart from these six the set also holds six and 8TPI blades, which allows the user to deal with other applications. Furthermore, these blades are made of high-speed steel material and perfect to deal with thick metals, and the torchlight will act as your friend while cutting metals. 

Bottom Lines

In conclusion, we can consider it as a perfect Sawzall blade for metal/thick metal because of its high-speed steel material and 18TPI blades which are ideal for this job.

2. Dewalt Bi-Metal Sawzall Blades For Steel

Cutting thick metals or steel sheets and rod with any blade will generate heat. A thicker and longer blade will produce more heat due to metal mass absorbing factors. So do not worry if these DeWalt Sawzall blades produce heat while cutting steel. 

This DeWalt bi-metal Sawzall blades case holds 12 different sized and TPI blades. In the example, one will get two pcs of 18TPI bi-metal blades and three pcs of 14TPI. For cutting such metals including steel, aluminium, or cast iron, 14-18 TPI BI-blades is ideal. That’s why we have picked this one as the perfect blade to deal with steel. 

We have used 14TPI  8 inches blades to experience its performance for cutting a dozen of steel pipes. First of all, we want to mention that the 8 inches size is huge, so always prefer low Sawzall speed to reduce the heat factors. It worked well with our porter cable reciprocating saw tool, and the combination has pleased us. 

However, the blades are pretty good in terms of working, but we had found a problem with its case. It was confusing to open it. We can’t get the right way for where and how to open it because from where it is supposed to open, that area is packed. We were about to use a screwdriver or some other tool to open it. But then we realized that it could damage the whole case. 

We want to suggest to our readers that read the instruction guide and get the right way to open the case, as we have done the same. 

Bottom Lines

In conclusion, we can consider these DeWalt Sawzall blades for steel perfect to handle the bulk work of cutting metals.

3. Workpro 32 PCS Set Sawzall Blades for Cast Iron

It needs highly efficient and strong blades with higher TPI to deal with cast iron. Furthermore, the Bi-metal material would be the perfect one for this task. These two factors are the reason why we have chosen this workpro Sawzall blades perfect for cutting the cast iron. 

First of all, its case has impressed us. When we got it from the supplier and opened the case, we found that all the 32 blades are arranged in a very accurate and safe manner. It is a highly safe case that we have ever seen. It’s not going to be tough to pick the required blade, and as well there are no chances of any injury. 

Now coming to the capability of this work Sawzall blades. As we mentioned that the case holds 32 pcs different sized blades but especially for the metals it has four 14TPI, two 18TPI and two 24TPI blades. Cast irons are a kind of thicker metal, and in our opinion, 14 TPI or 18 TPI blades would be better to deal with thick metals. One thing that has to be mentioned is these 14,18 and 24 TPI blades are thicker enough and not the right option for battery-powered Sawzall. 

We have used 18 TPI work pro Sawzall blades with our DeWalt DWE304 10AMP reciprocating saw to cut a few pipes of cast iron. We want to appreciate its performance as it took only 20 minutes to cut the 50 cast iron pipes. The best thing about these Sawzall blades is that they will save your lot of money. 

As these blades are durable enough and one doesn’t have to visit the hardware store again and again. We have used it to cut around 70 cast iron pipes, and it is still working like new. 

Button Lines

All-in-all one will get a wide variety and be able to deal with the most thicker cast iron rods or pipes if they own this 32 pcs set of work Sawzall blades for cast iron.

4. Horusdy 26 Pcs set of Sawzall blades for trees

In the yards, we have to do multiple jobs like tree pruning, cut branches or limbs or sometimes we have to cut a useless or dead tree. These all different jobs require different sizes of blades in TPI, thickness and length to get the job done. 

Here we have listed a perfect set of 3,5,6 and 8 TPI blades to deal with several jobs of the yard as we know that for tree cutting or pruning tasks, 3 to 10 TPI blades are ideal and this set of Sawzall blades holds the same in a good variety of length. 

That’s why we have picked this hoursdy 26 pcs set of Sawzall blades which is affordable for a contractor or a homeowner. When the supplier has delivered the set of hoursdy blades, we were pleased with the quantity and quality of blades. We have used all the blades with different applications. However, the lower TPI blades worked well with the trees of our yard. The thickness of the blades is in between 0.40 to 0.62, that’s why it never wrapped or bent while working with the challenging situation of cutting trees. 

But we want to mention that the higher TPI blades are not suitable for dealing with metals. It took around half an hour to cut a ⅛ inches thick cast iron pipe, and as well it produced too much heat. The best thing is that the product is compatible with all the significant sawmills, including DeWalt, Milwaukee, black+decker and many more. 

We have used it with our battery-powered Milwaukee Sawzall. As it is capable of providing the same results with a corded Sawzall. One more downside of these Sawzall blades is that sometimes they are prone to breaking from the base where it connects with the reciprocating tool. 

All-in-all one will get a wide variety and be able to deal with the most thicker cast iron rods or pipes if they own this 32 pcs set of work Sawzall blades for cast iron.

Bottom Lines

Overall this set of hoursdy Sawzall blades for trees could be a good and affordable option if you are looking for a cheaper set of tree pruning and cutting blades.

5. 9-Inch Five Sawzall Blades For Wood Pruning By Caliastro

Whether one has to deal with a 2 inches wood or with an 8 inches thicker branch, this set of 9 inches blades is going to make the job much more comfortable. This set of five pieces of 5TPI 9 inches blades is cheaper than the other durable Sawzall blades. But still, it is one of the perfect options to deal with woods as per our experience. 

This set of Sawzall blades holds five similar sized and TPI blades which are specially made for woods. The best thing is that it is made of high-quality carbon steel which allows us to complete the job in very less time. We have used it with our Skilsaw reciprocating tool, and the combination worked well. 

While we were testing the Sawzall blades, we found it pretty great to work with woods. But sometimes because of its lightweight, it is prone to be bent. That’s why we have run the Sawzall in lower speed, but still, the blades worked faster than other popular Sawzall blades for wood pruning. 

We have used it to cut down overgrown bushes and some old branches of maple and cherry trees. The cuts were straight and clean. Furthermore, we can say that these Sawzall blades held up very well during our trial session, and it can save a lot of money for the user by avoiding to get the reciprocating tools on rent. 

Bottom Lines

In conclusion, we can say that this set of five pieces of 9inches 5TPI blades are cheaper but still perfect Sawzall blades for wood pruning or cutting as its high carbon steel material makes it the most feasible Sawzall blades for wood.

6. Milwaukee 48-00-5026 Sawzall blades for nails

When it comes to cutting the nail-embedded woods, it is very tough to beat the speed and aggressiveness of Bi-metal Sawzall blades. It also prevents bending and high heat production while dealing with nails. That’s why we have picked these 0.62 thicker Milwaukee Sawzall blades as the perfect option to cut through the nails. 

The case of this Milwaukee Sawzall blades contains five 9 inches 5TPI blades, which are ideal for the nail-embedded woods. We used it to header down a wooden window, and we found the Milwaukee Sawzall blades took a couple of nails horizontally like a hot knife through butter. It was such a pleasing experience to work with this Sawzall blade. 

We used it with our new woodshed; also, we wanted to give it a unique look. That task was a brilliant way to check the efficiency of these Sawzall blades. There were around 44 mortise and tenon joints of nails, and we have to take them all off. After the task was completed, we appreciated its speed and performance. It was superb. 

The best thing was that we thought after this much work, we should have to re-sharpen the blades, but it still works like a new Sawzall blade. The only problem with these Sawzall blades is that sometimes it tends to be wrapped or bent. Maybe it was because of the size difference of blades and applications. The 9 inches length is good, but at the same time, it is bad too. 

Bottom Lines

The combination of bi-metal and 0.62 thickness is a great deal and a perfect Sawzall blade for nails.

7. Dewalt DW4856 Sawzall Blades For Roots Cutting

We have suggested many times in our previous articles that if you are a house owner, always prefer the best but cheaper products to save money. We have not only suggested this, as we always try to find out a similar thing for our readers. 

This time we have also brought a fabulous Sawzall blade for our audience who have to deal with their home’s yard jobs. Dewalt is a popular name in the market of power tools. This Dewalt DW4586 Sawzall blade holds six different sized blades. We have picked this set as perfect for cutting roots because of its 6TPI taper back blade. 

The tapered shape of the blade is highly capable of dealing with the most challenging roots of your yards. The best thing is that it can be used with all the popular Sawzall brands as we used it with our Milwaukee 2.5AMP Sawzall. Using this blade with a 2.5AMP reciprocating tool was that we want to be sure that it is a great Sawzall blade for house owners. 

We used it to cut several roots of multiple trees of our yard, which were 3-4 inches in diameter. It was really fast and aggressive to deal with roots. Its 10TPI blade was also really good for dealing with the roots and branches as we tested them both. 

Furthermore, when we tried to test the higher TPI blades, then it disappointed us. We have used the 14TPI Sawzall blade of this set and trust us it won’t work even for 10 minutes as it bends immediately. 

We want to suggest to our readers that if you have some extra challenging jobs of cutting roots, prefer its ⅝ TPI Tepper back blade for more speed and aggressiveness. 

Bottom Lines

As the final wrap, we can say that our house owner friends can save a huge amount by purchasing this perfect DeWalt’s Best Sawzall blades for roots pruning and cutting.

8. Ezarc R622PM sawzall blades for PVC

When it comes to deal with construction jobs, including PVC cutting, the bi-metal material Sawzall blades are better than others. These are also cheaper than the high steel carbon blades. This ezarc R622PM blade holds a six pcs set of 14TPI bi-metal Sawzall blades, which are ideal for cutting PVC. 

The best thing about this Sawzall blade is that it contains 8% cobalt in its teeth, making its most durable one. We have used it with our Makita 5AMP reciprocating saw tool, and it was really easy to install the Sawzall blade in it. As for the other brands, it is also very easy to install. 

During our trial session, we found it superb to deal with PVC pipes as it works like a hot knife cutting butter. It was aggressive. But still, we want to suggest that we adjust the speed of Sawzall to experience more feasibility and quality results. A big thanks to its 6 inches length, which was superb to deal with 4 inches thicker PVC pipes. 

The efficiency of cutting metals is an add on for the contractors to use it for cutting steel or galvanized metals. But make sure if you do not want to purchase a new set of the blade on the same day you have purchased it, then do not try to use it for cutting thicker metals. 

A downside of this ezarc Sawzall blade is that it is not thick enough, so there are huge chances of getting bent. Our trial session bent several times, but we have used a hammer to straighten it again. 

Bottom Lines

If you are looking for a workhorse to deal with construction saw jobs, then without any doubt, pick this Ezarc Sawzall blades for PVC, wood, and metal cutting. 

Buying Guide

Hope our reviews for the above-listed products will help you choose a perfect set of blades for your Sawzall. If you are still confused and unsure of what you are looking for, then look at this buying guide.

1. Material

There are four main types of material used for a Sawzall blade. You have to choose the perfect material that matches the kind of work you have to do.

2. High-Speed Steel

High-speed steel is the most durable material that has been used to make Best Sawzall blades. Sometimes, it is prone to snap because of its higher strength and rigidity, but it is still ideal for cutting hard and thicker metals. Milwaukee 2727-21HD is the best example of High-speed steel material.

3. Hi- Carbon Steel

Hi-carbon steel blades are the softest ones, and they cost less than other types of materials. House owners who have to saw dead limbs, branches, or do some other easy jobs in their yard can pick this material to get an affordable set of blades.

4. Bi-Metal

Bi-metal is a mix of high-speed steel and high carbon steel materials. In simple words, it is weaker than high-speed steels but, at the same time, more potent than high carbon steel. Bi-metal is a bit expensive and ideal material for the professionals. Workpro 32 PCS Sawzall blades is the most professional Bi-metal Sawzall blades.

5. Diamond 

Diamond Sawzall blades are highly capable of handling construction saw jobs. If we make it simple, it is the perfect material to reciprocate concrete, ceramic, and fiberglass.

6. Teeth Per Inch 

The essential feature to look at while choosing the perfect Sawzall blade matches your application to be cut. We all knew that blades vary in diameter, but if they have the same teeth per inch, they can work with the same application. That’s why it becomes essential to look for teeth per inch to get the perfect set of blades. Have a look at the brief guide of teeth per inch factor. 

7. Wood With Nails 

Sometimes it becomes typically challenging to cut the wood through nails, but if you are using a 6TPI blade, then you do not have to worry as it is perfect for nails. Milwaukee 48-00-5026 Sawzall blades is the Best Sawzall blades to deal with nail-embedded woods.

8. Dealing With Woods

Cutting thick branches, limbs, or creating firewood are some of the common jobs of yards. To make these jobs more accessible, it is highly recommended to use the ideal 10TPI blade. It is perfect for dealing with hardwoods too.

9. PVC Or Metal

PVC or metal cutting tasks demand above 10TPI blades. 14TPI would be perfect for cutting PVC and metals. Ensure the metals are thinner because 14TPI is not ideal for thicker metals as it would be burnt if one used it forcefully. Ezarc R622PM Sawzall blades is the ideal Sawzall blade to deal with PVC or metals.

10. Hardest and Thicker Metal

Dealing with the hardest and thicker metal is the toughest job requiring 18TPI or higher teeth per inch blade to get the job done. Do not use less than 18TPI blade to avoid injury and damages.

11. Length 

Feasibility terms rely on the length of Best Sawzall blades. Blades generally appear in 4 to 12 inches diameter. Working with a shorter blade improves the rigidity and aggressiveness, while a larger blade is flexible and perfect for tasks like tree pruning. In simple words, if one desires an available job, then pick 2 or 3 inches greater blade than the application. 

12. Thickness 

Blade’s thickness also plays a vital role in reciprocating jobs. Most blades come in 0.35 to 0.62 inches thickness. 0.62 is the thicker one and ideal for demolition and wood with nails. Less thickness than 0.62 reduces bending and vibration factors and makes your jibs more feasible. On the other hand, if you want a faster job than picking the thinnest blades, it also costs less than the thicker ones.

13. Sets Packaging 

It is highly recommended to prefer a set of blades instead of a single blade. Do not think that a set of packaging holds low quality, as it is the industry standard to sell blades. If you are a professional and have to deal with multiple applications, then a set packaging of blades would be an excellent option. Dewalt DW4892 Sawzall blades is the perfect set of Best Sawzall blades to deal with several applications.

Final Talk

So, here we can say that Milwaukee 2727-21HD is the best Sawzall blade with all the qualities needed. We know blade is an essential part of any Sawzall. Hence, this survey was conducted while taking care of all the necessary things for the machine. Our team is always working to provide optimal information from correct sources and tests.