The DeWalt DWE7491RS and Bosch 4100-09 are highly portable, good performing table saws, they can be used for professional as well as general work, if you’re a carpenter, lumber, logger or even a DIYer you can use either tool to get your job done efficiently and without any difficulty, both the models never fail to maintain their qualities.
Having both the models may not be an option for many, which are why we have written this article, we have done in-depth research of DeWalt DWE7491RS Vs Bosch 4100-09, their uses, pros, cons, and how different they are from each other. Read on to find which saw suits you best.
Since both the tools are similar in a lot of aspects, it is challenging to pick just one. Still, if we do have to choose, then we prefer the Bosch 4100-09 model because when working with table saws you want a tool that has 100 percent mobility making it flexible to work in different areas and this model since it is lightweight it is highly-mobile, has excellent functions, is durable of good quality and can be used on a lot of materials. The DeWalt DWE7491RS is also a highly preferred model; if the mobility weren’t an issue, then it would be our first choice.
DeWalt DWE7491RS Vs Bosch 4100-09: Comparison Chart
|Specification||DeWalt DWE7491RS||Bosch 4100-09|
|Motor||15 amp||15 amp|
|Mobility||Less mobile||High mobility|
|45-degree cut depth||2 ½ inch||2 ½ inch|
|Voltage||120 volt||120 volt|
|Power source||Corded electric||Corded electric|
|Price||Check Price||Check Price|
DeWalt DWE7491RS vs Bosch 4100-09: Differences
When it comes to portability, although both the table saws are highly portable, the Bosch 4100-09 is more portable than the Dwe7491RS, because of the weight, the Bosch 4100-09 is a lightweight model which make it easy to move around from one place to another.
The Dewalt Dwe7491RS comes with a 10-inch carbide-tipped 24 teeth blade, with this blade you can cut through any material without any difficulty, and it will help you do detailed work.
The Bosch 4100-09 comes with a standard 10-inch ATB blade with 24 teeth blade, this blade can also go through materials smoothly but only soft, easy materials it requires extra pressure and effort to go through more rigid materials.
4. Dado Blade
The bosch dado blade comes along with the tool, but for Dewalt, it needs to be purchased separately.
Horsepower refers to the power of the tool, and the horsepower of the Dewalt Dwe749RS is 2HP, and the horsepower of the Bosch 4100-09 is 4HP.
6. The Rip Capacity
The Dewalt table saw is cheaper than the bosch saw, so if you are on a budget and performing semi-skilled work, then you should get the Dewalt one.
DeWalt DWE7491RS Vs Bosch 4100-09: Similarities
Both the table saw models have the same motor; it is 15amp; they have similar performance too.
Both the tools are table saws.
Both the saws are mobile, which means that you can move them from one place to another.
Both the blades are 10-inch in diameter.
5. Built-In Storage
Both the tools have built-in storage; this allows you to store any accessories that are not in use, or you can store additional purchased blades.
6. Dado Stack
Both the tools can accept the dado stack up to 13/16 inch.
Both the tools have a Smart-Guard System and anti-kickback pawls and a riving knife.
DeWalt DWE7491RS Vs Bosch 4100-09: What’s In The Box?
- A 10-inch 24-tooth blade.
- A rolling stand.
- A push stick.
- It comes with a Mitre gauge.
- A Rolling Stand.
- A Rip Fence.
- A 2x Blade Wrenches.
- A Blade Guard Assembly.
- The Jobsite table saw.
- A GTA47W Gravity-Rise wheeled table saw stand.
- A Smart-Guard System – Barrier- Guard Device and Anti-Kickback Pawls.
- A 10-inch blade.
- A SquareLock rip fence.
- A miter gauge.
- A push stick.
- A throat-plate insert.
- A multi-function blade wrench.
- An adjustment wrench.
DeWalt DWE7491RS Vs Bosch 4100-09: Overview
Overview Of DeWalt DWE7491RS
- Your purchase includes one Dewalt table saw, 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip...
- Other Specs: Max rip to left of blade – 22” | Max rip to right of blade – 32-1/2” | Max width of Dado –...
- Rolling stand designed for easy set up and breakdown with excellent stability
The DeWalt DWE7491RS is a robust table saw that allows you to cut through soft and hardwood materials easily. It has a 15-amp motor with a speed of 4800 RPM, with excellent performance, and is an affordable tool. It has a telescoping fence system that allows smooth adjustments and spot-on accuracy. This tool is claimed as the best table saw in the market; you can make slim-cuts with flip-over fence.
The maximum rip-capacity is 32.5 inches, which means that this tool can work with rigid and hard materials without any difficulty and can be used for professional work. It has a dust collection port, which is 2 ½ inches; this can be attached to vacuum tubes; it is durable and steady. It can smoothly go through plywood, framing material, Maple, and other materials.
This is also a highly safe tool, and it comes with a button switch which is covered by a flip over plastic this button needs to be pressed to turn the machine on, it also has a power-loss reset, this means that during the working process if the machine gets turned off and comes back on it will not go back to how it was before the power was lost.
Overview Of Bosch 4100-09
- PORTABLE: Innovative, gravity rise, collapsible table saw stand allows you to adjust height to meet your specific needs...
- EFFICIENT: Featuring SquareLock rip fence engineered to increase cutting trueness and allowing for one handed operation...
- PRECISION: Bosch 4100 09 worksite table saw provides high precision cutting as well as efficient power with 3,650 no...
Bosch is a brand that has been in the market for a very long time, and it has excellent tools that are used by many professionals, semi-professionals, and beginners.
The Bosch 4100-09 is another table saw which is of high quality; it is powerful and durable too. It has a 15amp motor and speed of 3650 RM; this tool can cut through a lot of materials like pine, plywood, and other materials easily and can be used by professionals as well as DIYers. The handle of this tool can be easily adjusted. It also comes with a dust-collection system. This tool is very portable, meaning it is lightweight and can be moved around easily.
Another benefit of this tool is it is very affordable and has a lot of advantages. This is also a highly safe tool; it has an Arbor-lock and a Smart-Guard System anti-kickback pawls riving knife making the tool more comfortable to use and more appealing it is also designed with integrated carry handles this gives the users easy access when carrying the tool around to get work done.
1. Can you plug the DeWalt DWE7491RS saw into a 240V outlet?
No, you cannot do so, since this tool has only 120 volts AC. If exceeded, it can burn.
2. What is a DeWalt DWE 7491 saws speed?
The Dwe7491 has a speed of about 4800RMP.
3. Which tool is heavier?
The DWE7491RS is the heavier tool.
4. What is the size of a bosh 410009 blade?
The Bosch 410009 comes with a standard 10-inch ATB blade with a 24 teeth blade.
5. What is the horsepower of a Bosch 410009?
The horsepower of the Bosch 410009 is 4HP.
Table saws are much needed tools to cut through hard materials, which is why it is vital to have the right table saw.
Many brands sell table saws, but we have chosen two of the best ones in the market the DeWalt DWE7491RS, and the Bosch 4100-09, both these tools have similar performance but are different from each other. These tools are excellent for professional and DIY work.
For many reasons, people cannot buy both the tools, which is why we advise getting the Bosch 4100-09; this tool is more on the affordable side, and it is lightweight, which means it can be moved easily from one place to another. The DeWalt DWE7491RS tool is also a high-performing, durable tool, it is expensive, and the drawback is it is heavy, which means it is difficult to move this tool from one place to another.
Compared to the Bosch 4100-09, the DeWalt DWE7491RS tool can cut through hard materials more smoothly and efficiently. Based on your affordability and brand preference and the work you need to do, you should buy the tool that suits you best.